Use and maintenance of micro-needle forceps

Precautions for use
1. The clamping degree of the needle holder: Do not clamp too tightly to avoid damage or bending.
2. Store on a shelf or place in a suitable device for processing.
3. It is necessary to carefully clean the residual blood and dirt on the equipment. Do not use sharps and wire brushes to clean the equipment; dry it with a soft cloth after cleaning, and oil the joints and activities.
4. After each use, rinse immediately as soon as possible.
5. Do not rinse the instrument with salt water (distilled water is available).
6. During the cleaning process, be careful not to use excessive force or pressure to prevent damage to the equipment.
7. Do not use wool, cotton or gauze to wipe the device.
8. After the instrument is used, it should be placed separately from other instruments and disinfected and cleaned separately.
9. The equipment should be handled with care during use, and should not be impacted by any collision, let alone fall.
10. When cleaning instruments after surgery, they should also be cleaned separately from ordinary instruments. The blood on the instruments should be cleaned with a soft brush, and the blood in the teeth should be carefully scrubbed and dried with a soft cloth.

Daily maintenance
1. After cleaning and drying the instrument, oil it, and cover the tip of the instrument with a rubber tube. It is required to be tight enough. Too tight will make the instrument lose its elasticity, and if the instrument is too loose, the tip will be exposed and easily damaged. Various instruments are arranged in order and placed in a special instrument box.
2. Microscopic instruments should be kept by special personnel, and the performance of the instruments should be checked frequently, and any damaged instruments should be repaired in time.
3. When the instrument is not used for a long time, oil it regularly every half month and move the shaft joint to prevent rust and prolong the service life of the instrument.

Post time: Oct-09-2022